Total 64 Questions
Last Updated On : 26-Nov-2025
The smartest way to prepare for your Fortinet NSE7_EFW-7.2 exam isn't just reading—it's practicing. There's a difference between knowing the material and being ready for the exam. Our NSE7_EFW-7.2 practice test bridge that gap, transforming your knowledge into a passing score. Familiarize yourself with the exact style and difficulty of the real Fortinet NSE7_EFW-7.2 practice questions, so there are no surprises. Get detailed feedback to identify your strengths and target your weaknesses, making your study time more efficient.
Independent surveys and user-reported data show that candidates who use NSE7_EFW-7.2 practice tests are ~30-40% more likely to pass on their first attempt.
Refer to the exhibit, which shows a network diagram.
Which IPsec phase 2 configuration should you impalement so that only one remote site is connected at any time?
A. Set route-overlap to allow.
B. Set single-source to enable
C. Set route-overlap to either use—new or use-old
D. Set net-device to enable
Refer to the exhibit, which shows an error in system fortiguard configuration.
What is the reason you cannot set the protocol to udp in config system fortiguard?
A. udp is not a protocol option.
B. fortiguard-anycast is set to enable. Most Voted.
C. You do not have the corresponding write access.
D. FortiManager provides FortiGuard.
Which two statements about the neighbor-group command are true? (Choose two.)
A. It applies common settings in an OSPF area
B. You can apply it in Internal BGP (IBGP) and External BGP (EBGP)
C. You can configure it on the GUI
D. It is combined with the neighbor-range parameter
Which two statements about IKE version 2 fragmentation are true? (Choose two.)
A. Only some IKE version 2 packets are considered fragmentable
B. The reassembly timeout default value is 30 seconds
C. It is performed at the IP layer
D. The maximum number of IKE version 2 fragments is 128
Which statement about network processor (NP) offloading is true?
A. For TCP traffic FortiGate CPU offloads the first packets of SYN/ACK and ACK of the three-way handshake to NP
B. The NP provides IPS signature matching
C. You can disable the NP for each firewall policy using the command np-acceleration st to loose.
D. The NP checks the session key or IPSec SA
Explanation:
Network processors (NPs) are specialized hardware within FortiGate devices that accelerate certain security functions. One of the primary functions of NPs is to provide IPS signature matching (B), allowing for high-speed inspection of traffic against a database of known threat signatures.
Refer to the exhibit, which shows a custom signature.
Which two modifications must you apply to the configuration of this custom signature so that you can save it on FortiGate? (Choose two.)
A. Ensure that the header syntax is F-SBID.
B. Add severity.
C. Add attack_id.
D. Start options with --.
You contoured an address object on the tool fortiGate in a Security Fabric. This object is not synchronized with a downstream device. Which two reasons could be the cause? (Choose two)
A. The address object on the tool FortiGate has fabric-object set to disable
B. The root FortiGate has configuration-sync set to enable
C. The downstream TortiGate has fabric-object-unification set to local
D. The downstream FortiGate has configuration-sync set to local
Explanation:
Option A is correct because the address object on the tool FortiGate will not be synchronized with the downstream devices if it has fabric-object set to disable. This option controls whether the address object is shared with other FortiGate devices in the Security Fabric or not1.
Option C is correct because the downstream FortiGate will not receive the address object from the tool FortiGate if it has fabric-object-unification set to local. This option controls whether the downstream FortiGate uses the address objects from the root FortiGate or its own local address objects2.
Option B is incorrect because the root FortiGate has configuration-sync set to enable by default, which means that it will synchronize the address objects with the downstream devices unless they are disabled by the fabric-object option3.
Option D is incorrect because the downstream FortiGate has configuration-sync set to local by default, which means that it will receive the address objects from the root FortiGate unless they are overridden by the fabric-object-unification option4.
References: =
1: Group address objects synchronized from FortiManager5
2: Security Fabric address object unification6
3: Configuration synchronization7
4: Configuration synchronization7
: Security Fabric - Fortinet Documentation
| Page 1 out of 10 Pages |
Our new Timed NSE7_EFW-7.2 Exam Simulation replicates the exact format, question count, and strict time limit of the real test.
We don't just test your knowledge; we build your Fortinet exam-day stamina and speed, so you can answer with confidence when it matters most.
Copyright © - All Rights Reserved